Go to website
EAC Boot up and setup IP and firewall
Powering up device
In order to power up the device, you will need 24 volt AC adapter. AC adapter is wired as according to the picture below. 1 ) Wire EAC Controllers use 24VAC power. Connectors are the right bottom left of the controller. Power Port 2) Toggle On Switch Toggle switch is located on the same side as the ethernet port. Slide the switch and wait for the lights to fl
There are two options of connecting to EAC: Ethernet Wireless The default IP address will be within the range of 10.10.20.1 – 10.10.20.254. The default IP address of the device will be within the box. The paper should look something like below. Default Ip letter Now go to your browser. Chrome is preferred and suggested browser.